IMCO IPT7 1/2", 7 Flute, .060R 4XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. The IPT7 is the most versatile of the POW•R•PATH end mills. Engineered specifically for HEM tool paths. The IPT7’s unique design runs up...

IMCO IPT7 1", 7 Flute, .060R 2XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. The IPT7 is the most versatile of the POW•R•PATH end mills. Engineered specifically for HEM tool paths. The IPT7’s unique design runs up...

1 Dia., 5 Flute, 0.060" Radius, 45° Roughing Carbide End Mill, TiAlN Extreme Coated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide.   Specs D1 Diameter 1 in. D2 Shank...

1 Dia., 5 Flute, 0.060" Radius, 45° Roughing Carbide End Mill, TiAlN Futura Coated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide.   Specs D1 Diameter 1 in. D2 Shank...

1 Dia., 5 Flute, 0.060" Radius, 45° Roughing Carbide End Mill, TiCN Coated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide.   Specs D1 Diameter 1 in. D2 Shank...

1 Dia., 5 Flute, 0.060" Radius, 45° Roughing Carbide End Mill, TiN Coated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide.   Specs D1 Diameter 1 in. D2 Shank...

1 Dia., 5 Flute, 0.060" Radius, 45° Roughing Carbide End Mill, Uncoated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide.   Specs D1 Diameter 1 in. D2 Shank...

3/8" Dia., 3 Flute., 2" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

3/8" Dia., 3 Flute., 2" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 3/8 D2...

1/2" Dia., 3 Flute., 2" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1/2" Dia., 3 Flute., 2" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1/2 D2...

1" Dia., 3 Flute., 2" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1" Dia., 3 Flute., 3-1/4" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1 D2 ...

3/4" Dia., 3 Flute., 2-1/4" LOC, 0.120" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength and unsurpassed tool life. Specs ...

3/8" Dia., 3 Flute., 2" LOC, 0.060" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 Diameter 3/8 D2 Shank Diameter 3/8 L1 ...