3/16 Dia., 3 Flute., 5/16 LOC, Ball Nose, ALU-Power HPC, DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides...

ER20 Collet Chuck, CAT40 Taper Shank, 6" Gage Length, 25,000 RPM Balanced

For ER20 Series Collets The Entire Clamping Range Is From .039" To .511" CAT Taper Shank Per ASME B5.50-2009-CAT AT3 Or Better Accuracy On Shank Tapers Concentric To 0.0002" T.I.R (At I.D.) AD...

ER20 Collet Chuck, CAT40 Taper Shank, 2.20 Gage Length, 25,000 RPM Balanced

For ER20 Series Collets The Entire Clamping Range Is From .039" To .511" CAT Taper Shank Per ASME B5.50-2009-CAT AT3 Or Better Accuracy On Shank Tapers Concentric To 0.0002" T.I.R (At I.D.) AD...

ER20 Collet Chuck, CAT40 Taper Shank, 4" Gage Length, 25,000 RPM Balanced

For ER20 Series Collets The Entire Clamping Range Is From .039" To .511" CAT Taper Shank Per ASME B5.50-2009-CAT AT3 Or Better Accuracy On Shank Tapers Concentric To 0.0002" T.I.R (At I.D.) AD...

ER20 Collet Chuck, CAT50 Taper Shank, 6" Gage Length, 15,000 RPM Balanced

For ER20 Series Collets The Entire Clamping Range Is From .039" To .511" CAT Taper Shank Per ASME B5.50-2009-CAT AT3 Or Better Accuracy On Shank Tapers Concentric To 0.0002" T.I.R (At I.D...

ER20 Collet Chuck, CAT40 Taper Shank, 6" Gage Length, 15,000 RPM Balanced

For ER20 Series Collets The Entire Clamping Range Is From .039" To .511" CAT Taper Shank Per ASME B5.50-2009-CAT AT3 Or Better Accuracy On Shank Tapers Concentric To 0.0002" T.I.R (At I.D...

ER20 Collet Chuck, CAT40 Taper Shank, 2.20 Gage Length, 15,000 RPM Balanced

For ER20 Series Collets The Entire Clamping Range Is From .039" To .511" CAT Taper Shank Per ASME B5.50-2009-CAT AT3 Or Better Accuracy On Shank Tapers Concentric To 0.0002" T.I.R (At I.D...

ER25 Collet Chuck, CAT50 Taper Shank, 4" Gage Length, 15,000 RPM Balanced

For ER25 Series Collets The Entire Clamping Range Is From .039" To .629" CAT Taper Shank Per ASME B5.50-2009-CAT AT3 Or Better Accuracy On Shank Tapers Concentric To 0.0002" T.I.R (At I.D.) AD/B...

ER20 Collet Chuck, CAT40 Taper Shank, 4" Gage Length, 15,000 RPM Balanced

For ER20 Series Collets The Entire Clamping Range Is From .039" To .511" CAT Taper Shank Per ASME B5.50-2009-CAT AT3 Or Better Accuracy On Shank Tapers Concentric To 0.0002" T.I.R (At I.D.) AD/B...

3/8 Dia., 4 Flute., 7/8 LOC, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

11/32" Dia., 2 Flute, Ball Nose, Standard Length, Double End, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature...

11/32" Dia., 2 Flute, Ball Nose, Standard Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid...

1/2" Dia., 1" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter...

1/2" Dia., 1" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter...

7/32" Dia., 3-1/2" OAL, 4 Flute, Standard Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Same construction features as single end...