51/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

11mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

3-15/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

2-17/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

2-17/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

1-25/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

40mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

28mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

51/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

11mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

3-19/32" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

3-1/4" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)