25/32" Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144 degree)

1/2 Dia., 6 Flute., 1-1/4 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/8" Dia., 6 Flute., 1-1/2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

1-1/4" Flanged Shank, Straight Flute, Extended Length Spade Drill Holder, 31/32" to 1-3/8" Insert Range, 2 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters  

1-1/4" Flanged Shank, Straight Flute, Intermediate Length Spade Drill Holder, 31/32" to 1-3/8" Insert Range, 2 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters  

MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 31/32" to 1-3/8" Insert Range, 2 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters  

MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 31/32" to 1-3/8" Insert Range, 2 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters  

1-1/2" Shank, Straight Flute, Extended Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters  

1-1/4" Shank, Straight Flute, Standard Length Spade Drill Holder, 31/32" to 1-3/8" Insert Range, 2 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters  

1-1/4" Shank, Straight Flute, Short Length Spade Drill Holder, 31/32" to 1-3/8" Insert Range, 2 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters  

7/32 Dia., 4 Flute., 1/4 LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/4" Dia., 3 Flute., 1-5/8" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1/2" Dia., 3 Flute., 2" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1/2" Dia., 3 Flute., 1-5/8" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

3/4" Dia., 3 Flute., 1-5/8" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 3/4 D2...