1" Shank, Straight Flute, Intermediate Length Spade Drill Holder, 45/64" to 15/16" Insert Range, 1 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters  

1/8" Dia., 4 Flute., 1/8" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/4" Shank, Straight Flute, Short Length Spade Drill Holder, 3/8" to 27/64" Insert Range, Y Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters  

1/4 Dia., 3 Flute., 3/8 LOC, 3/4 Reach, 2-1/2 OAL, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1/2" Dia., 3 Flute., 5/8" LOC, 1-3/8" Reach, 3" OAL, 0.060" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1/2 D2...

3/8" Dia., 3 Flute., 1/2" LOC, 1-1/8" Reach, 3" OAL, 0.030" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 3/8 D2...

1/4" Dia., 3 Flute., 3/8" LOC, 3/4" Reach, 2-1/2" OAL, 0.010" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1/4 D2...

1/2 Dia., 3 Flute., 5/8 LOC, 1-3/8 Reach, 3 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces...

3/4" Dia., 3 Flute., 1-5/8" LOC, 0.120" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

3/8" Dia., 3 Flute., 2" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1/4" Dia., 3 Flute., 3/8" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1/8" Dia., 3 Flute., 3/8" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

3/4" Dia., 3 Flute., 1-5/8" LOC, 0.120" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 3/4 D2...

3/8" Dia., 3 Flute., 2" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 3/8 D2...

1/4" Dia., 3 Flute., 3/8" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1/4 D2...