5.6mm YG-1 Carbide Dream Drill Flat Bottom, 6mm Shank, 180° Point, 2XD, X Coated

  Drilling for Steel, Cast Steel, Cast Iron Optimized flute shape for excellent chip evacuation 180° point angle enables drilling of flat, inclined, and curved surfaces Minimized burrs on entrance and exit when drilling thin plates 2XD Coolant...

6.9mm YG-1 Carbide Dream Drill High Feed, 8mm Shank, 140° Point, 5XD, Thru Coolant, H Coated

  Drilling for Steel, Cast Steel, Cast Iron Self centering and chip breaking by R-thinning Higher productivity due to 1.5 to 2 times faster feeding than a 2 flute drill 5XD Coolant Thru H Coated - Multi Layer coating for higher productivity and...

Letter "I" YG-1 Carbide Dream Drill High Feed, 5/16" Shank, 140° Point, 3XD, Thru Coolant, H Coated

  Drilling for Steel, Cast Steel, Cast Iron Self centering and chip breaking by R-thinning Higher productivity due to 1.5 to 2 times faster feeding than a 2 flute drill 3XD Coolant Thru H Coated - Multi Layer coating for higher productivity and...

3.5mm YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 5XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable torque and long tool life Optimized flute shape for...

5.4mm YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 3XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable torque and long tool life Optimized flute shape for...

6.0mm YG-1 Carbide Dream Drill General, 6.0mm Shank, 140° Point, 3XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable torque and long tool life Optimized flute shape for...

17/32" YG-1 Carbide Dream Drill General, 17/32" Shank, 140° Point, 3XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable torque and long tool life Optimized flute shape for...

5.2mm YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 8XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable torque and long tool life Optimized flute shape for...

3.5mm YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 5XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable torque and long tool life Optimized flute shape for...

25/64" YG-1 Carbide Dream Drill General, 7/16" Shank, 140° Point, 5XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable torque and long tool life Optimized flute shape for...

5.4mm YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 3XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable torque and long tool life Optimized flute shape for...

23/64" YG-1 Carbide Dream Drill General, 25/64" Shank, 140° Point, 3XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable torque and long tool life Optimized flute shape for...

1-3/4" Diameter x 1/4" Thick, Series 3, Carbide C5 (P40) Spade Drill Insert TiAlN Coated

Multipurpose GenometryIncrease wear resistance over M4 and T15For general use in Gray cast iron, aluminum and non-ferrousPoint Angle  - 132 degree2pcs/package

1-7/32" Diameter x 3/16" Thick, 2 Series, Flat Bottom Super Cobalt (T15) Spade Drill Insert TiN Coated

Increase wear resistance over M4For general use in carbon steel, steel alloys, stainless steel, cast iron, aluminum and non-ferrous Point Angle  - 180 degree

2-1/32" Diameter x 5/16" Thick, 4 Series, SM-Point Super Cobalt (T15) Spade Drill Insert TiAlN Coated

Hybrid Point - combines standard point with web thinning for improved performanceReduced thrust, improved centering and stability, increased speed and feedsFor general use in carbon steel, steel alloys, stainless steel, cast iron, aluminum and...