1 Dia., 3 Flute., 1-1/4 LOC, 4-3/8 Reach, 7 OAL, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1" Dia., 3 Flute., 1-1/4" LOC, 4-3/8" Reach, 7" OAL, 0.010" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1 D2 ...

1 Dia., 3 Flute, 1-3/4 LOC, Ball Nose, ALU-Power Roughing Carbide End Mill, Uncoated

  Excellent cutting qualities on aluminum, copper Increased tool life and superior chip evacuation Reduces chipping of corner edges Solid Carbide   Specs D1 Diameter 1 in. D2 Shank Diameter 1 in. L1 Length of...

1 Dia., 3 Flute, 1-3/4 LOC, ALU-Power Roughing Carbide End Mill, Uncoated

  Excellent cutting qualities on aluminum, copper Increased tool life and superior chip evacuation Reduces chipping of corner edges Solid Carbide   Specs D1 Diameter 1 in. D2 Shank Diameter 1 in. L1 Length of...

1" Dia., 3 Flute., 2" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1" Dia., 3 Flute., 3-1/4" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1 D2 ...

1" Dia., 3 Flute., 1-1/4" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1 D2 ...

1" Dia., 2-1/4" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter 1 in. D2 Shank Diameter 1 in. L1 Length of Cut 2-1/4...

1" Dia., 2-1/4" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter 1 in. D2 Shank Diameter 1 in. L1 Length of Cut 2-1/4...

1" Dia., 3 Flute., 2" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1 D2 ...

1" Dia., 3 Flute., 1-1/4" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1" Dia., 3 Flute., 3-1/4" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1 D2 ...

1" Dia., 3 Flute., 1-1/4" LOC, 2-5/8" Reach, 5" OAL, 0.250" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 Diameter 1 D2 Shank Diameter 1 D3 Neck...

1" Dia., 3 Flute., 1-1/4" LOC, 2-5/8" Reach, 5" OAL, 0.190" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 Diameter 1 D2 Shank Diameter 1 D3 Neck...

1" Dia., 3 Flute., 1-1/4" LOC, 2-5/8" Reach, 5" OAL, 0.120" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 Diameter 1 D2 Shank Diameter 1 D3 Neck...