3/4" Dia., 3 Flute., 1" LOC, 5" Reach, 7" OAL, 0.060" Corner Rad, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

3/4" Dia., 3 Flute., 1" LOC, 2" Reach, 4" OAL, 0.030" Corner Rad, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1/2" Dia., 1" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter 1/2 in. D2 Shank Diameter 1/2 in. L1 Length of Cut 1...

1/2" Dia., 1" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter 1/2 in. D2 Shank Diameter 1/2 in. L1 Length of Cut 1...

3/4" Dia., 3 Flute., 1" LOC, 3-3/8" Reach, 6" OAL, 0.030" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 3/4 D2...

3/4" Dia., 3 Flute., 1" LOC, 3-3/8" Reach, 6" OAL, 0.030" Corner Rad, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

3/8" Dia., 6 Flute., 1" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/4" Dia., 3 Flute., 1" LOC, 5" Reach, 7" OAL, 0.030" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 3/4 D2...

3/4" Dia., 3 Flute., 1" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

3/4" Dia., 3 Flute., 1" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 3/4 D2...

3/4" Dia., 3 Flute., 1" LOC, 5" Reach, 7" OAL, 0.030" Corner Rad, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

3/4" Dia., 3 Flute, 1" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 3/4 D2...

1/2" Dia., 4 Flute., 1" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

1/2" Dia., 2 Flute, Ball Nose, Standard Length, Double End, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and wear resistance Solid...

1/2" Dia., 2 Flute, Ball Nose, Standard Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter 1/2 in. D2 Shank Diameter 1/2 in...