3/8 Dia., 3 Flute., 1/2 LOC, 2-1/8 Reach, Ball Nose, 4 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC Catalog Download Specs D1 Diameter 3/8 in. D2 Shank...

3/8 Dia., 3 Flute., 1/2 LOC, 2-1/8 Reach, Ball Nose, 4 OAL, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides extra edge strength and unsurpassed tool life. YG-1...

1/8 Dia., 3 Flute., 1/4 LOC, Ball Nose, ALU-Power HPC, Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC Catalog Download Specs D1 Diameter 1/8 in. D2 Shank...

1/8 Dia., 3 Flute., 1/4 LOC, Ball Nose, ALU-Power HPC, DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides extra edge strength and unsurpassed tool life. YG-1...

1/2 Dia., 3 Flute., 5/8 LOC, 2-1/4 Reach, Ball Nose, 4 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC Catalog Download Specs D1 Diameter 1/2 in. D2 Shank...

1/2 Dia., 3 Flute., 5/8 LOC, 2-1/4 Reach, Ball Nose, 4 OAL, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides extra edge strength and unsurpassed tool life. YG-1...

3/16 Dia., 3 Flute., 5/16 LOC, Ball Nose, ALU-Power HPC, Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC Catalog Download Specs D1 Diameter 1/8 in. D2 Shank...

1/8 Dia., 3 Flute., 3/8 LOC, Ball Nose, ALU-Power HPC, DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides extra edge strength and unsurpassed tool life. YG-1...

1/2 Dia., 3 Flute., 5/8 LOC, 3-3/8 Reach, Ball Nose, 5 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC Catalog Download Specs D1 Diameter 1/2 in. D2 Shank...

1/2 Dia., 3 Flute., 5/8 LOC, 3-3/8 Reach, Ball Nose, 5 OAL, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides extra edge strength and unsurpassed tool life. YG-1...

1/4 Dia., 3 Flute., 3/8 LOC, Ball Nose, ALU-Power HPC, Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC Catalog Download Specs D1 Diameter 3/16 in. D2...

3/16 Dia., 3 Flute., 5/16 LOC, Ball Nose, ALU-Power HPC, DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides extra edge strength and unsurpassed tool life. YG-1...

5/8 Dia., 3 Flute., 3/4 LOC, 3-3/8 Reach, Ball Nose, 6 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC Catalog Download Specs D1 Diameter 5/8 in. D2 Shank...

5/8 Dia., 3 Flute., 3/4 LOC, 3-3/8 Reach, Ball Nose, 6 OAL, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides extra edge strength and unsurpassed tool life. YG-1...

5/16 Dia., 3 Flute., 5/8 LOC, Ball Nose, ALU-Power HPC, Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC Catalog Download Specs D1 Diameter 3/16 in. D2...