Quick view YG-1 | sku: SV125033 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120033 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125034 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120034 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV120033 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125034 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120034 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV125034 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120034 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV120034 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV125035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV120035 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV120036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV125037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV120037 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV125038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV120038 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV125039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV120039 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view YG-1 | sku: SV125040 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 33/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 17/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 35/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 37/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 19/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 39/64" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
Quick view 5/8" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.58 Now: $36.42 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected