1/2 Dia., 5 Flute, 0.040" Radius, Stub Length, 45° Roughing Carbide End Mill, Uncoated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide.   ...

1/2" Dia., 3 Flute., 5/8" LOC, 1-3/8" Reach, 3" OAL, 0.060" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2 Dia., 3 Flute., 5/8 LOC, 1-3/8 Reach, 3 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 2-1/4" Reach, 4" OAL, 0.060" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 4-1/4" Reach, 6" OAL, 0.010" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2 Dia., 3 Flute., 5/8 LOC, 2-1/4 Reach, 4 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/4" Dia., 3 Flute., 5/8" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 3-3/8" Reach, 5" OAL, 0.060" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 1-3/8" Reach, 3" OAL, 0.030" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 4-1/4" Reach, 6" OAL, 0.060" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 2-1/4" Reach, 4" OAL, 0.030" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2 Dia., 3 Flute., 5/8 LOC, 2-1/4 Reach, Ball Nose, 4 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC...

1/4" Dia., 2 Flute, Ball Nose, Standard Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid...

1/4" Dia., 2 Flute, Standard Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...