47mm Diameter x 6.4mm Thick, Series 3, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle  - 132 degree

1-3/8" Diameter x 3/16" Thick, Series 2, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle  - 132 degree

2-7/32" Diameter x 5/16" Thick, Series 4, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle  - 132 degree,...

47mm Diameter x 6.4mm Thick, Series 3, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle  - 132 degree,...

1-1/4" Diameter x 3/16" Thick, Series 2, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle  - 132 degree,...

2-3/32" Diameter x 5/16" Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

47mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

1-1/8" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

3/4" Dia., 3 Flute., 1" LOC, 0.250" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 1-5/8" LOC, 0.190" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 2-1/2" LOC, 0.120" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

7/16" Dia., 3 Flute., 9/16" LOC, 0.120" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

5/8" Dia., 3 Flute., 1-5/8" LOC, 0.090" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 0.060" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

5/8 Dia., 3 Flute., 3/4 LOC, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...