33/64" Diameter x 1/8" Thick, Series 0, Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree) 2pcs/package

1-23/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

36mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

63/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

18mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2-11/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2-7/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2-3/64" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

1/2" Dia., 3 Flute., 5/8" LOC, 2-1/4" Reach, 4" OAL, 0.060" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

3/8" Dia., 3 Flute., 1/2" LOC, 2-1/8" Reach, 4" OAL, 0.030" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 4-1/4" Reach, 6" OAL, 0.010" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2 Dia., 3 Flute., 5/8 LOC, 2-1/4 Reach, 4 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

3/4" Dia., 3 Flute., 2-1/4" LOC, 0.120" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/4" Dia., 3 Flute., 5/8" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...