1/4" Dia., 3 Flute., 3/8" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2 Dia., 3 Flute., 2 LOC, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/4" Dia., 3 Flute., 3/8" LOC, 1-1/8" Reach, 3" OAL, 0.060" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/4" Dia., 3 Flute, 3/8" LOC, 1-1/8" Reach, 3" OAL, 0.030" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/4" Dia., 3 Flute., 3/8" LOC, 1-1/8" Reach, 3" OAL, 0.010" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/4 Dia., 3 Flute., 3/8 LOC, 1-1/8 Reach, 3 OAL, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

5/16" Dia., 3 Flute., 7/16" LOC, 0.090" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/8" Dia., 3 Flute., 1/4" LOC, 0.010" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/8 Dia., 3 Flute., 3/8 LOC, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

TPCT160508R-AL Grade YG50 Hi-Polished Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

TPCT160504R-AL Grade YG50 Hi-Polished Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

TPCT110408R-AL Grade YG50 Hi-Polished Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

TPCT110404R-AL Grade YG50 Hi-Polished Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

SEGT42.5-AL / SEGT12T3-AL Grade YG50 Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

SEGT43-AL / SEGT1204-AL Grade YG50 Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10