1-3/4" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

1-3/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

M9 x 1.25 D5 3 Flute High Performance Spiral Fluted, Short Chamfer Prime Tap For Multi-Purpose X Coated HSS-PM

HIGH PERFORMANCE, MULTIPURPOSE TAPPING IN VARIOUS DUCTILE MATERIALS For Steels, Stainless Steels, Cast Iron and Non-Ferrous Materials Premium cutting edge strength X-Coating for high performance,...

M6 x 1 D5 3 Flute High Performance Spiral Fluted Prime Tap For Multi-Purpose X Coated HSS-PM

HIGH PERFORMANCE, MULTIPURPOSE TAPPING IN VARIOUS DUCTILE MATERIALS For Steels, Stainless Steels, Cast Iron and Non-Ferrous Materials Premium cutting edge strength X-Coating for high performance,...

#5-40 UNC H2 3 Flute High Performance Spiral Pointed Prime Tap For Multi-Purpose, X Coated HSS-PM

HIGH PERFORMANCE, MULTIPURPOSE TAPPING IN VARIOUS DUCTILE MATERIALS For Steels, Stainless Steels, Cast Iron and Non-Ferrous Materials Premium cutting edge strength X-Coating for high performance,...

#8-32 UNC H2 3 Flute High Performance Spiral Fluted, Short Chamfer Prime Tap For Multi-Purpose, X Coated HSS-PM

HIGH PERFORMANCE, MULTIPURPOSE TAPPING IN VARIOUS DUCTILE MATERIALS For Steels, Stainless Steels, Cast Iron and Non-Ferrous Materials Premium cutting edge strength X-Coating for high performance,...

#8-32 UNC H2 3 Flute High Performance Spiral Fluted Prime Tap For Multi-Purpose, X Coated HSS-PM

HIGH PERFORMANCE, MULTIPURPOSE TAPPING IN VARIOUS DUCTILE MATERIALS For Steels, Stainless Steels, Cast Iron and Non-Ferrous Materials Premium cutting edge strength X-Coating for high performance,...

3.5mm YG-1 Carbide Dream Drill Flat Bottom, 6mm Shank, 180° Point, 2XD, X Coated

  Drilling for Steel, Cast Steel, Cast Iron Optimized flute shape for excellent chip evacuation 180° point angle enables drilling of flat, inclined, and curved surfaces Minimized burrs on...

1-3/8" Diameter x 3/16" Thick, Series 2, Carbide C3 (K10) Spade Drill Insert TiN Coated

Cast Iron GenometryIncrease wear resistance over M4 and T15high performance in Gray cast iron over 220 Brinell, malleable cast iron with short chips, silicon aluminum and coppor alloysPoint...

3/4" Diameter x 5/32" Thick, Series 1, Carbide C3 (K10) Spade Drill Insert TiN Coated

Cast Iron GenometryIncrease wear resistance over M4 and T15high performance in Gray cast iron over 220 Brinell, malleable cast iron with short chips, silicon aluminum and coppor alloysPoint...

9/16" Diameter x 1/8" Thick, Series 0, Carbide C3 (K10) Spade Drill Insert TiN Coated

Cast Iron GenometryIncrease wear resistance over M4 and T15high performance in Gray cast iron over 220 Brinell, malleable cast iron with short chips, silicon aluminum and coppor alloysPoint...

12.5mm Diameter x 2.4mm Thick, Series Z, Carbide C3 (K10) Spade Drill Insert TiN Coated

Cast Iron GenometryIncrease wear resistance over M4 and T15high performance in Gray cast iron over 220 Brinell, malleable cast iron with short chips, silicon aluminum and coppor alloysPoint...

13/32" Diameter x 3/32" Thick, Series Y, Carbide C3 (K10) Spade Drill Insert TiN Coated

Cast Iron GenometryIncrease wear resistance over M4 and T15high performance in Gray cast iron over 220 Brinell, malleable cast iron with short chips, silicon aluminum and coppor alloysPoint...

1-1/2" Diameter x 1/4" Thick, Series 3, Carbide C5 (P40) Spade Drill Insert TiN Coated

Multipurpose GenometryIncrease wear resistance over M4 and T15For general use in carbon steel and alloy steelsPoint Angle  - 132 degree

1-1/16" Diameter x 3/16" Thick, Series 2, Carbide C5 (P40) Spade Drill Insert TiN Coated

Multipurpose GenometryIncrease wear resistance over M4 and T15For general use in carbon steel and alloy steelsPoint Angle  - 132 degree