5/16" Dia., 3 Flute., 7/16" LOC, 0.090" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/8" Dia., 3 Flute., 1/4" LOC, 0.010" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/8 Dia., 3 Flute., 3/8 LOC, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

TPCT160508R-AL Grade YG50 Hi-Polished Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

TPCT160504R-AL Grade YG50 Hi-Polished Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

TPCT110408R-AL Grade YG50 Hi-Polished Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

TPCT110404R-AL Grade YG50 Hi-Polished Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

SEGT42.5-AL / SEGT12T3-AL Grade YG50 Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

SEGT43-AL / SEGT1204-AL Grade YG50 Uncoated Carbide Insert

Uncoated Milling Grade for Aluminum Submicron carbide substrate for high wear resistance Preventing built up edge with shining surface Sold in Packages of 10

3/8 Dia., 3 Flute., 1/2 LOC, 2-1/8 Reach, Ball Nose, 4 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC...

1/8 Dia., 3 Flute., 1/4 LOC, Ball Nose, ALU-Power HPC, Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC...

3/16" Dia., 2 Flute, Ball Nose, Standard Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid...

3/16" Dia., 3/4" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter...

5/32" Dia., 3" OAL, 4 Flute, Standard Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Same construction features as single end...

1mm Dia, 4mm LOC, 39mm OAL, 4 Flute, Standard Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...