1/4 Dia., 4 Flute, 5/8 LOC, Coated YG-1 Only One PM60 End Mill

ONLY ONE PM60 4 FLUTE 30 DEGREE HELIX CENTER CUT REGULAR LENGTH END MILL Single End 30° Helix Center Cutting PM60 Coated End Mills Steel, Stainless Steel, Inconel, Titanium, Copper, Cast Iron...

1/4 Dia., 3 Flute, 3/4 LOC, ALU-Power Roughing Carbide End Mill, Uncoated

  Excellent cutting qualities on aluminum, copper Increased tool life and superior chip evacuation Reduces chipping of corner edges Solid...

1/4" Dia., 6 Flute., 1/2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/4 Dia., 3 Flute., 3/8 LOC, 3/4 Reach, 2-1/2 OAL, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

1/4 Dia., 3 Flute., 3/8 LOC, 3/4 Reach, 2 1/2 OAL, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/4" Dia., 6 Flute., 3/4" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/4 Dia., 3 Flute., 3/8 LOC, 1-1/8 Reach, 3 OAL, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

1/4 Dia., 3 Flute., 3/8 LOC, 1-1/8 Reach, 3 OAL, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/4" Dia., 6 Flute., 1-1/8" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/4" Dia., 1-1/8" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter...

1/4" Dia., 1-1/8" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter...

1/4" Dia., 6 Flute., 1-1/2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/4 Dia., 3 Flute., 3/8 LOC, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

1/4 Dia., 3 Flute., 3/8 LOC, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/4 Dia., 3 Flute., 5/8 LOC, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...