1/2" Diameter x 3/32" Thick, Series Z, Super Cobalt (T15) Spade Drill Insert TiAlN Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree) 2pcs/package

1/2" Diameter x 3/32" Thick, Series Z, Super Cobalt (T15) Spade Drill Insert TiN Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree) 2pcs/package

1/2" Dia., 3 Flute., 1-1/4" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 1-1/4" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 1-5/8" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 5/8" LOC, 4-1/4" Reach, 6" OAL, 0.190" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 4-1/4" Reach, 6" OAL, 0.120" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 4-1/4" Reach, 6" OAL, 0.090" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 4-1/4" Reach, 6" OAL, 0.060" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 4-1/4" Reach, 6" OAL, 0.030" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 4-1/4" Reach, 6" OAL, 0.010" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1" Dia., 3 Flute., 1-1/4" LOC, 2-5/8" Reach, 5" OAL, 0.250" Corner Rad, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

3/4" Dia., 3 Flute., 1" LOC, 3-3/8" Reach, 6" OAL, 0.190" Corner Rad, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

5/8" Dia., 3 Flute., 3/4" LOC, 1-5/8" Reach, 4" OAL, 0.190" Corner Rad, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...