1/2" Mill Diameter with 1/16" Corner Radius I-Xmill Carbide Insert For Hardened Material (HRc40 - HRc65)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/16" Corner Radius I-Xmill Carbide Insert For General Material (~HRc50)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/32" Corner Radius I-Xmill Carbide Insert For Graphite

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/32" Corner Radius I-Xmill Carbide Insert For Hardened Material (HRc40 - HRc65)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/32" Corner Radius I-Xmill Carbide Insert For General Material (~HRc50)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/64" Corner Radius I-Xmill Carbide Insert For Graphite

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/64" Corner Radius I-Xmill Carbide Insert For Hardened Material (HRc40 - HRc65)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/64" Corner Radius I-Xmill Carbide Insert For General Material (~HRc50)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" I-Xmill Ball Carbide Insert For Graphite

i-Xmill BALL INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite Special Geometry and extremely abrasive resistant Coating...

1/2" I-Xmill Ball Carbide Insert For Hardened Material (HRc40 - HRc65)

i-Xmill BALL INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite Special Geometry and extremely abrasive resistant Coating...

1/2" I-Xmill Ball Carbide Insert For General Material (~HRc50)

i-Xmill BALL INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite Special Geometry and extremely abrasive resistant Coating...

1/2" Diameter Square End 6 Flute Carbide 45° Multi-Helix I-Smart Modular Milling Head, .835" Length Below Shank, M6 Thread

YG-1 Series XGMF29: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 45° Helix 6 Flute Square End Wrench Included With Each...

1/2" Diameter Square End 4 Flute Carbide 27°/30° Multi-Helix I-Smart Modular Milling Head, .835" Length Below Shank, M6 Thread

YG-1 Series XGMF25: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 27°/30° Multiple Helix 4 Flute Square End Wrench...

1/2" Diameter 4 Flute Carbide 27°/30° Multi-Helix I-Smart Modular Milling Head with .090 Corner Radius, .835" Length Below Shank, M6 Thread

YG-1 Series XGMF20: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 27°/30° Multiple Helix 4 Flute Corner Radius Wrench...

1/2" Diameter 4 Flute Carbide 27°/30° Multi-Helix I-Smart Modular Milling Head with .080 Corner Radius, .835" Length Below Shank, M6 Thread

YG-1 Series XGMF20: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 27°/30° Multiple Helix 4 Flute Corner Radius Wrench...