1/4 Dia., 3 Flute., 3/8 LOC, 1-1/8 Reach, 3 OAL, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

1/4 Dia., 3 Flute., 3/8 LOC, 1-1/8 Reach, 3 OAL, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/4 Dia., 4 Flute, 90° YGBasiX Carbide Drill Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

1/4 Dia., 4 Flute, 90° YGBasiX Carbide Drill Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

1/4 Dia., 4 Flute, 60° YGBasiX Carbide Drill Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

1/4 Dia., 4 Flute, 60° YGBasiX Carbide Drill Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

1/4 Dia., 2 Flute, 90° YGBasiX Carbide Drill Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

1/4 Dia., 2 Flute, 90° YGBasiX Carbide Drill Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

1/4 Dia., 2 Flute, 60° YGBasiX Carbide Drill Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and...

1/4 Dia., 2 Flute, 60° YGBasiX Carbide Drill Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

7/16" Diameter x 3/32" Thick, Series Y, Flat Bottom Super Cobalt (T15) Spade Drill Insert TiAlN Coated

Increase wear resistance over M4For general use in carbon steel, steel alloys, stainless steel, cast iron, aluminum and non-ferrous Point Angle  - 180 degree

7/16" Diameter x 3/32" Thick, Series Y, Flat Bottom Super Cobalt (T15) Spade Drill Insert TiN Coated

Increase wear resistance over M4For general use in carbon steel, steel alloys, stainless steel, cast iron, aluminum and non-ferrous Point Angle  - 180 degree

1/4" Dia., 6 Flute., 1-1/8" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/4" Dia., 3 Flute., 1-1/4" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/4" Dia., 3 Flute., 5/8" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...