1/2 Dia., 6 Flute., 1-1/2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2" Dia., 3 Flute., 2-1/2" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 2" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

7/16" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

7/16" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and...

1/2 Dia., 6 Flute., 1-5/8 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2" Dia., 6 Flute., 5/8" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2" Dia., 3 Flute., 3" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 4 Flute., 1-1/4" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2" Mill Diameter with 1/16" Corner Radius I-Xmill Carbide Insert For Graphite

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/16" Corner Radius I-Xmill Carbide Insert For Hardened Material (HRc40 - HRc65)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/16" Corner Radius I-Xmill Carbide Insert For General Material (~HRc50)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/32" Corner Radius I-Xmill Carbide Insert For Graphite

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/32" Corner Radius I-Xmill Carbide Insert For Hardened Material (HRc40 - HRc65)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

1/2" Mill Diameter with 1/32" Corner Radius I-Xmill Carbide Insert For General Material (~HRc50)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...