3/4" Dia., 3 Flute., 3/4" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

3/4" Diameter Square End 6 Flute Carbide 45° Multi-Helix I-Smart Modular Milling Head, 1.144" Length Below Shank, M10 Thread

YG-1 Series XGMF29: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 45° Helix 6 Flute Square End Wrench Included With Each...

3/4" Diameter Square End 4 Flute Carbide 27°/30° Multi-Helix I-Smart Modular Milling Head, 1.144" Length Below Shank, M10 Thread

YG-1 Series XGMF25: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 27°/30° Multiple Helix 4 Flute Square End Wrench...

3/4" Diameter 4 Flute Carbide 27°/30° Multi-Helix I-Smart Modular Milling Head with .120 Corner Radius, 1.144" Length Below Shank, M10 Thread

YG-1 Series XGMF20: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 27°/30° Multiple Helix 4 Flute Corner Radius Wrench...

3/4" Diameter 4 Flute Carbide 27°/30° Multi-Helix I-Smart Modular Milling Head with .090 Corner Radius, 1.144" Length Below Shank, M10 Thread

YG-1 Series XGMF20: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 27°/30° Multiple Helix 4 Flute Corner Radius Wrench...

3/4" Diameter 4 Flute Carbide 27°/30° Multi-Helix I-Smart Modular Milling Head with .080 Corner Radius, 1.144" Length Below Shank, M10 Thread

YG-1 Series XGMF20: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 27°/30° Multiple Helix 4 Flute Corner Radius Wrench...

3/4" Diameter 4 Flute Carbide 27°/30° Multi-Helix I-Smart Modular Milling Head with .060 Corner Radius, 1.144" Length Below Shank, M10 Thread

YG-1 Series XGMF20: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 27°/30° Multiple Helix 4 Flute Corner Radius Wrench...

3/4" Diameter 4 Flute Carbide 27°/30° Multi-Helix I-Smart Modular Milling Head with .040 Corner Radius, 1.144" Length Below Shank, M10 Thread

YG-1 Series XGMF20: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 27°/30° Multiple Helix 4 Flute Corner Radius Wrench...

3/4" Diameter 4 Flute Carbide 27°/30° Multi-Helix I-Smart Modular Milling Head with .030 Corner Radius, 1.144" Length Below Shank, M10 Thread

YG-1 Series XGMF20: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 27°/30° Multiple Helix 4 Flute Corner Radius Wrench...

3/4" Diameter Ball Nose 2 Flute Carbide 30° Helix I-Smart Modular Milling Head, 1.144" Length Below Shank, M10 Thread

YG-1 Series XGMF15: i-Smart Screw On Ultra-Micro Grain Carbide Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills 30° Helix 2 Flute Ball Nose Wrench Included With Each...

3/4" Dia., 4 Flute., 3/4" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4 Dia., 4 Flute., 3/4 LOC, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4" Dia., 4 Flute., 3/4" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4 Dia., 4 Flute., 3/4 LOC, Chamfer, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/4 Dia., 4 Flute., 1 LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...