3/8" YG-1 Carbide Dream Drill High Feed, 3/8" Shank, 140° Point, 3XD, Thru Coolant, H Coated

  Drilling for Steel, Cast Steel, Cast Iron Self centering and chip breaking by R-thinning Higher productivity due to 1.5 to 2 times faster feeding than a 2 flute drill 3XD Coolant Thru H...

3/8" YG-1 Carbide Dream Drill High Feed, 3/8" Shank, 140° Point, 5XD, Thru Coolant, H Coated

  Drilling for Steel, Cast Steel, Cast Iron Self centering and chip breaking by R-thinning Higher productivity due to 1.5 to 2 times faster feeding than a 2 flute drill 5XD Coolant Thru H...

3/8" YG-1 Carbide Dream Drill Flat Bottom, 10mm Shank, 180° Point, 2XD, X Coated

  Drilling for Steel, Cast Steel, Cast Iron Optimized flute shape for excellent chip evacuation 180° point angle enables drilling of flat, inclined, and curved surfaces Minimized burrs on...

3/8" Dia., 4 Flute., 1/2" LOC, 0.010" Corner Rad, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/8" Dia., 6 Flute., 5/8" LOC, 0.030" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/8" Dia., 6 Flute., 1" LOC, 0.030" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/8" Dia., 6 Flute., 1-1/2" LOC, 0.030" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/8" Dia., 4 Flute., 7/8" LOC, 0.010" Corner Rad, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/8" Dia., 6 Flute., 2" LOC, 0.030" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/8" YG-1 Carbide Dream Drill General, 10mm Shank, 140° Point, 3XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

3/8" YG-1 Carbide Dream Drill General, 10mm Shank, 140° Point, 3XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

3/8" YG-1 Carbide INOX Dream Drill, 10mm Shank, 140° Point, 3XD, Thru Coolant, TiAlN Coated

  Special flute shape and geometry suitable for machining stainless steel Excellent chip evacuation from better surface treatment Point R-thinning achieves superior centering and chip curling...

3/8" YG-1 Carbide Dream Drill General, 10mm Shank, 140° Point, 8XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

3/8" Dia., 4 Flute., 1/2" LOC, 0.060" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/8" Dia., 4 Flute., 7/8" LOC, 0.060" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...