2-3/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiAlN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

37mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

18.5mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2-5/16" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2-3/16" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2-1/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

1-11/16" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

1-3/64" Diameter x 3/16" Thick, Series 2, Carbide C3 (K10) Spade Drill Insert TiAlN Coated

Cast Iron GenometryIncrease wear resistance over M4 and T15high performance in Gray cast iron over 220 Brinell, malleable cast iron with short chips, silicon aluminum and coppor alloysPoint...

26mm Diameter x 4.8mm Thick, Series 2, Carbide C3 (K10) Spade Drill Insert TiAlN Coated

Cast Iron GenometryIncrease wear resistance over M4 and T15high performance in Gray cast iron over 220 Brinell, malleable cast iron with short chips, silicon aluminum and coppor alloysPoint...

47/64" Diameter x 5/32" Thick, Series 1, Carbide C3 (K10) Spade Drill Insert TiAlN Coated

Cast Iron GenometryIncrease wear resistance over M4 and T15high performance in Gray cast iron over 220 Brinell, malleable cast iron with short chips, silicon aluminum and coppor alloysPoint...

35/64" Diameter x 1/8" Thick, Series 0, Carbide C3 (K10) Spade Drill Insert TiAlN Coated

Cast Iron GenometryIncrease wear resistance over M4 and T15high performance in Gray cast iron over 220 Brinell, malleable cast iron with short chips, silicon aluminum and coppor alloysPoint...

12mm Diameter x 2.4mm Thick, Series Z, Carbide C3 (K10) Spade Drill Insert TiAlN Coated

Cast Iron GenometryIncrease wear resistance over M4 and T15high performance in Gray cast iron over 220 Brinell, malleable cast iron with short chips, silicon aluminum and coppor alloysPoint...