3.5mm YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 3XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

3.6mm YG-1 Carbide Dream Drill General, 3.6mm Shank, 140° Point, 3XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

7/32" YG-1 Carbide Dream Drill General, 7/32" Shank, 140° Point, 3XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

3.5mm YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 3XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

13/64" YG-1 Carbide Dream Drill General, 15/64" Shank, 140° Point, 3XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

5/16" Dia., 6 Flute., 1-5/8" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/16" Dia., 4 Flute., 5/16" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

7/16" Dia., 4 Flute., 5/8" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/16" Dia., 4 Flute., 5/16" LOC, 0.010" Corner Rad V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2" Dia., 3 Flute., 5/8" LOC, 3-3/8" Reach, 5" OAL, 0.190" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 3-3/8" Reach, 5" OAL, 0.120" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 3-3/8" Reach, 5" OAL, 0.090" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 3-3/8" Reach, 5" OAL, 0.060" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 3-3/8" Reach, 5" OAL, 0.030" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 3-3/8" Reach, 5" OAL, 0.010" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...