35mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

1-5/32" Diameter x 3/16" Thick, Series 2, Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

35mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiAlN Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

1-3/32" Diameter x 3/16" Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiAlN Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

35mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

1-1/16" Diameter x 3/16" Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

35mm Diameter x 4.8mm Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

35mm Diameter x 4.8mm Thick, Series 2, HSS (M4) Spade Drill Insert TiAlN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2-3/8" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiAlN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

35mm Diameter x 4.8mm Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

1/2 Dia., 6 Flute., 1-1/4 LOC, 0.015 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4" Dia., 6 Flute., 1-1/2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

13/32" Dia., 4 Flute., 15/16" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1" Dia., 4 Flute., 2" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...