7.2mm YG-1 Carbide Dream Drill Flat Bottom, 8mm Shank, 180° Point, 2XD, X Coated

  Drilling for Steel, Cast Steel, Cast Iron Optimized flute shape for excellent chip evacuation 180° point angle enables drilling of flat, inclined, and curved surfaces Minimized burrs on...

8.3mm YG-1 Carbide Dream Drill High Feed, 10mm Shank, 140° Point, 5XD, Thru Coolant, H Coated

  Drilling for Steel, Cast Steel, Cast Iron Self centering and chip breaking by R-thinning Higher productivity due to 1.5 to 2 times faster feeding than a 2 flute drill 5XD Coolant Thru H...

21/64" YG-1 Carbide Dream Drill High Feed, 3/8" Shank, 140° Point, 3XD, Thru Coolant, H Coated

  Drilling for Steel, Cast Steel, Cast Iron Self centering and chip breaking by R-thinning Higher productivity due to 1.5 to 2 times faster feeding than a 2 flute drill 3XD Coolant Thru H...

4.9mm YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 5XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

17/64" YG-1 Carbide Dream Drill General, 8mm Shank, 140° Point, 3XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

7.8mm YG-1 Carbide Dream Drill General, 7.8mm Shank, 140° Point, 3XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

6.6mm YG-1 Carbide Dream Drill General, 8mm Shank, 140° Point, 8XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

4.9mm YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 5XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

17/64" YG-1 Carbide Dream Drill General, 8mm Shank, 140° Point, 3XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

1/2" YG-1 Carbide Dream Drill General, 1/2" Shank, 140° Point, 3XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

3/4" Dia., 6 Flute., 2-1/4" LOC, 0.015" Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2" Dia., 6 Flute., 5/8" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4" Dia., 4 Flute., 2-1/4" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/8" Dia., 4 Flute., 1/2" LOC, 0.030" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4 Dia., 4 Flute., 2-1/4 LOC, Chamfer, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...