Quick view YG-1 | sku: SV125408 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view YG-1 | sku: SV1252D2 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV120404 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view YG-1 | sku: SV120130 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV125350 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125254 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125222 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV175480 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125110 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV1252D2 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV120404 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view YG-1 | sku: SV120130 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV125350 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125254 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125222 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV175480 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125110 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV120404 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view YG-1 | sku: SV120130 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV125350 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125254 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125222 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV175480 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125110 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV120130 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV125350 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125254 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125222 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV175480 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125110 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV125350 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125254 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125222 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV175480 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125110 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV125320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125254 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125222 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV175480 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125110 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV125254 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125222 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV175480 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125110 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV125222 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV175480 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125110 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV175480 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125110 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV125110 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV125062 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV125045 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV175130 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV125028 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view YG-1 | sku: SV175095 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 4-1/8" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 2-1/2" Diameter x 11.1mm Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 4-1/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.34 Now: $170.34 Add to Cart Compare Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 1-15/32" Diameter x 1/4" Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 3-25/32" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 2-27/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 2-11/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 48mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 1-5/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 31/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 45/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 13mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 7/16" Diameter x 3/32" Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view 9.5mm Diameter x 2.4mm Thick, Y Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected
