7/32" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and wear resistance Solid Carbide Specs D1 Diameter...

3/8" Dia., 6 Flute., 5/8" LOC, 0.030" Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/8" Dia., 6 Flute., 5/8" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

1/2" Dia., 3 Flute., 5/8" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1/4" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and wear resistance Solid Carbide Specs D1 Diameter...

1/4" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and wear resistance Solid Carbide Specs D1 Diameter...

3/16" Dia., 4 Flute., 5/8" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

1/2 Dia., 4 Flute., 5/8 LOC, 0.015 Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/16" Dia., 4 Flute., 5/8" LOC, 0.010" Corner Rad V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/8 Dia., 4 Flute., 1/2 LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

IMCO IPT9 1/4", 9 Flute, .030R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 9 flutes for increased feed rates and excellent surface finish. The IPT9’s...

5/16" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and wear resistance Solid Carbide Specs D1 Diameter...

5/16" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and wear resistance Solid Carbide Specs D1 Diameter...

7/16 Dia., 4 Flute., 5/8 LOC, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

7/16" Dia., 3 Flute., 1-1/4" LOC, 0.090" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength and unsurpassed tool life. Specs ...