1/2" Dia., 6 Flute., 5/8" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/4" Dia., 3 Flute., 1" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 3/4 D2...

1" Dia., 3 Flute., 1-1/4" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces. Specs D1 Diameter 1 D2 ...

7/16 Dia., 3 Flute, 1 LOC, Roughing, 45° Helix, Uncoated Carbide End Mill

Roughing, 3 Flute, 45° Helix, Uncoated Solid Carbide End Mill  Single End 45° Helix Roughing Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 7/16" Length of Cut 1" Overall...

1/2" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and wear resistance Solid Carbide Specs D1 Diameter...

1/2" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and wear resistance Solid Carbide Specs D1 Diameter...

3/4" Dia., 3 Flute., 1" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1" Dia., 3 Flute., 1-1/4" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength...

1/4" Dia., 2 Flute., 1/4" LOC, 1/4" Plain Shank, 3" OAL, Ball Nose Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Designed for high precision milling operation.Higher wear-resistance. ...

1/4" Dia., 4 Flute., 1" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/4 Dia., 4 Flute., 3/4 LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

1/2 Dia., 3 Flute, 1 LOC, Roughing, 45° Helix, Uncoated Carbide End Mill

Roughing, 3 Flute, 45° Helix, Uncoated Solid Carbide End Mill  Single End 45° Helix Roughing Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 1/2" Length of Cut 1" Overall Length...

5/8" Dia., 4 Flute., 3/4" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

9/32" Dia., 4 Flute., 1" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

IMCO IPT9 1/4", 9 Flute, .015R 3.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 9 flutes for increased feed rates and excellent surface finish. The IPT9’s...