1" Dia., 6 Flute., 3-1/4" LOC, 0.125" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

IMCO IPT11 12 MM, 11 Flute, 1.0R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 11 flutes for increased feed rates and excellent surface finish. The IPT11’s...

IMCO IPT13 12 MM, 13 Flute, 1.0R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 13 flutes yield incredible metal removal rates and tool life. The IPT13’s have a...

IMCO IPT9 12 MM, 9 Flute, 1.0R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 9 flutes for increased feed rates and excellent surface finish. The IPT9’s...

IMCO E14 10.0 MM, 4 Flute, LL SPECTOR AlTiN Coated Carbide End Mill

For Speeds & Feeds - Click Here! For general machining in a wide range of materials Best for roughing and finishing AlTiN coated for superior heat resistance and hardness for increased tool life

1MM Dia., 2 Flute., 1.5MM LOC, 0.10MM Corner Radius, 6MM Plain Shank, 40MM OAL, Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Deep slotting is possible by reduced neck.Corner radius for preventing the...

3/4" Dia., 4 Flute., 1-1/2" LOC, 0.060" Corner Rad, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

1" Dia., 6 Flute., 4" LOC, 0.125" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/4" Dia., 6 Flute., 1" LOC, 0.190" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

IMCO IPT11 12 MM, 11 Flute, 1.5R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 11 flutes for increased feed rates and excellent surface finish. The IPT11’s...

IMCO IPT13 12 MM, 13 Flute, 1.5R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 13 flutes yield incredible metal removal rates and tool life. The IPT13’s have a...

IMCO IPT9 12 MM, 9 Flute, 1.5R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 9 flutes for increased feed rates and excellent surface finish. The IPT9’s...

IMCO E14 25.0 MM, 4 Flute, RR SPECTOR AlTiN Coated Carbide End Mill

For Speeds & Feeds - Click Here! For general machining in a wide range of materials Best for roughing and finishing AlTiN coated for superior heat resistance and hardness for increased tool life

1.5MM Dia., 2 Flute., 2.2MM LOC, 0.10MM Corner Radius, 6MM Plain Shank, 40MM OAL, Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Deep slotting is possible by reduced neck.Corner radius for preventing the...

1" Dia., 4 Flute., 1" LOC, 0.060" Corner Rad, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...