1/4" Dia., 3 Flute., 3/8" LOC, 3/4" Reach, 2-1/2" OAL, 0.060" Corner Rad, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

3/4" Dia., 3 Flute., 1" LOC, 3-3/8" Reach, 6" OAL, 0.030" Corner Rad, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2 Dia., 3 Flute., 5/8 LOC, 4-1/4 Reach, 6 OAL, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

3/4" Dia., 3 Flute., 1-5/8" LOC, 0.250" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

5/16" Dia., 3 Flute., 5/8" LOC, 0.010" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

3/16" Dia., 3 Flute., 5/16" LOC, 0.010" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

1/4 Dia., 3 Flute., 1-1/4 LOC, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

#3 YG-1 Carbide Dream Drill High Feed, 1/4" Shank, 140° Point, 5XD, Thru Coolant, H Coated

  Drilling for Steel, Cast Steel, Cast Iron Self centering and chip breaking by R-thinning Higher productivity due to 1.5 to 2 times faster feeding than a 2 flute drill 5XD Coolant Thru H...

5.5mm YG-1 Carbide Dream Drill High Feed, 6mm Shank, 140° Point, 3XD, Thru Coolant, H Coated

  Drilling for Steel, Cast Steel, Cast Iron Self centering and chip breaking by R-thinning Higher productivity due to 1.5 to 2 times faster feeding than a 2 flute drill 3XD Coolant Thru H...

39mm Diameter x 6.4mm Thick, Series 3, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle  - 132 degree

27mm Diameter x 4.8mm Thick, Series 2, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle  - 132 degree

19.5mm Diameter x 4mm Thick, Series 1, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle  - 132 degree

37/64" Diameter x 1/8" Thick, Series 0, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle  - 132 degree

27/64" Diameter x 3/32" Thick, Series Y, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle  - 132 degree

4-1/8" Diameter x 7/16" Thick, Series 8, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle  - 132 degree,...