1 Dia., 4 Flute, 2 LOC, Coated YG-1 Only One PM60 End Mill

ONLY ONE PM60 4 FLUTE 30 DEGREE HELIX CENTER CUT REGULAR LENGTH END MILL Single End 30° Helix Center Cutting PM60 Coated End Mills Steel, Stainless Steel, Inconel, Titanium, Copper, Cast Iron...

1 Dia., 5 Flute, 0.060" Radius, 45° Roughing Carbide End Mill, TiAlN Extreme Coated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide...

1 Dia., 5 Flute, 0.060" Radius, 45° Roughing Carbide End Mill, TiAlN Futura Coated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide...

1 Dia., 5 Flute, 0.060" Radius, 45° Roughing Carbide End Mill, TiCN Coated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide...

1 Dia., 5 Flute, 0.060" Radius, 45° Roughing Carbide End Mill, TiN Coated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide...

1 Dia., 5 Flute, 0.060" Radius, 45° Roughing Carbide End Mill, Uncoated

  5 flute design gives minimum harmonic vibration. Stub tools for minimum deflection and maximum rigidity. Ideal for profile milling. Not recommended for slotting. Solid Carbide...

1" Dia., 3 Flute., 2" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1" Dia., 3 Flute., 3-1/4" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1" Dia., 3 Flute., 2" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1" Dia., 3 Flute., 2" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1" Dia., 3 Flute., 3-1/4" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1" Dia., 3 Flute., 2" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1" Dia., 6 Flute., 2" LOC, 0.030" Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1" Dia., 4 Flute., 2" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1" Dia., 6 Flute., 2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...