3/8" Dia., 6 Flute., 2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

#10-32 UNF H3 3 Flute High Performance Spiral Fluted, Short Chamfer Prime Tap For Multi-Purpose, X Coated HSS-PM

HIGH PERFORMANCE, MULTIPURPOSE TAPPING IN VARIOUS DUCTILE MATERIALS For Steels, Stainless Steels, Cast Iron and Non-Ferrous Materials Premium cutting edge strength X-Coating for high performance,...

#10-32 UNF H3 3 Flute High Performance Spiral Fluted Prime Tap For Multi-Purpose, X Coated HSS-PM

HIGH PERFORMANCE, MULTIPURPOSE TAPPING IN VARIOUS DUCTILE MATERIALS For Steels, Stainless Steels, Cast Iron and Non-Ferrous Materials Premium cutting edge strength X-Coating for high performance,...

3/8" Mill Diameter with 1/16" Corner Radius I-Xmill Carbide Insert For Graphite

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

3/8" Mill Diameter with 1/16" Corner Radius I-Xmill Carbide Insert For Hardened Material (HRc40 - HRc65)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

3/8" Mill Diameter with 1/16" Corner Radius I-Xmill Carbide Insert For General Material (~HRc50)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

3/8" Mill Diameter with 1/32" Corner Radius I-Xmill Carbide Insert For Graphite

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

3/8" Mill Diameter with 1/32" Corner Radius I-Xmill Carbide Insert For Hardened Material (HRc40 - HRc65)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

3/8" Mill Diameter with 1/32" Corner Radius I-Xmill Carbide Insert For General Material (~HRc50)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

3/8" Mill Diameter with 1/64" Corner Radius I-Xmill Carbide Insert For Graphite

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

3/8" Mill Diameter with 1/64" Corner Radius I-Xmill Carbide Insert For Hardened Material (HRc40 - HRc65)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

3/8" Mill Diameter with 1/64" Corner Radius I-Xmill Carbide Insert For General Material (~HRc50)

i-Xmill CORNER RADIUS INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite The optimum geometry of the tool to achieve the...

3/8" I-Xmill Ball Carbide Insert For Graphite

i-Xmill BALL INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite Special Geometry and extremely abrasive resistant Coating...

3/8" I-Xmill Ball Carbide Insert For Hardened Material (HRc40 - HRc65)

i-Xmill BALL INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite Special Geometry and extremely abrasive resistant Coating...

3/8" I-Xmill Ball Carbide Insert For General Material (~HRc50)

i-Xmill BALL INSERTS Three Types of Inserts are available For General Purpose (~HRc50) For Hardened Material (HRc40~HRc65) For Graphite Special Geometry and extremely abrasive resistant Coating...