3/8" Dia., 6 Flute., 1" LOC, 0.015" Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/8" Dia., 3 Flute., 1/2" LOC, 2-1/8" Reach, 4" OAL, 0.030" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

3/8" Dia., 3 Flute., 1/2" LOC, 2-1/8" Reach, 4" OAL, 0.030" Corner Rad, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

3/8" Regular Length i-Smart Steel Holder, Taper Neck, For Modular Milling Heads, 1/2" Shank, M6 Thread

ZMT Series: i-Smart Steel Holders, Taper Neck Type For Screw On Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills Coolant Hole Through The Shank Wrench Included With Each...

3/8" Stub Length i-Smart Steel Holder, Straight Neck, For Modular Milling Heads, 3/8" Shank, M6 Thread

ZMS Series: i-Smart Steel Holders, Straight Neck Type For Screw On Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills Coolant Hole Through The Shank Wrench Included With Each...

3/8" Stub Length i-Smart Carbide Holder, Straight Neck, For Modular Milling Heads, 3/8" Shank, M6 Thread

ZMC Series: i-Smart Carbide Holders, Straight Neck Type For Screw On Modular Milling Heads Reduce Cost as Compared to Solid Carbide End Mills Coolant Hole Through The Shank Wrench Included With Each...

3/8 Dia., 3 Flute., 1/2 LOC, 2-1/8 Reach, Ball Nose, 4 OAL, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC...

3/8 Dia., 3 Flute., 1/2 LOC, 2-1/8 Reach, Ball Nose, 4 OAL, ALU-Power DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides...

3/8 Dia., 3 Flute, 7/8 LOC, Ball Nose, ALU-Power Roughing Carbide End Mill, Uncoated

  Excellent cutting qualities on aluminum, copper Increased tool life and superior chip evacuation Reduces chipping of corner edges Solid...

3/8 Dia., 3 Flute, 7/8 LOC, ALU-Power Roughing Carbide End Mill, Uncoated

  Excellent cutting qualities on aluminum, copper Increased tool life and superior chip evacuation Reduces chipping of corner edges Solid...

3/8 Dia., 4 Flute, 90° YGBasiX Carbide Chamfer Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

3/8 Dia., 4 Flute, 90° YGBasiX Carbide Chamfer Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and...

3/8 Dia., 4 Flute, 60° YGBasiX Carbide Chamfer Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

3/8 Dia., 4 Flute, 60° YGBasiX Carbide Chamfer Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and...

3/8 Dia., 2 Flute, 120° YGBasiX Carbide Chamfer Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...