3/16" YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 8XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

3/16" Dia., 4 Flute., 1/4" LOC, 0.004" Corner Radius, 2" OAL, Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Deep slotting is...

3/16" Dia., 4 Flute., 5/16" LOC, 0.030" Corner Rad V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/16" Dia., 4 Flute., 7/16" LOC, 0.030" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/16" Dia., 4 Flute., 5/8" LOC, 0.030" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/16" YG-1 Carbide INOX Dream Drill, 6mm Shank, 140° Point, 5XD, Thru Coolant, TiAlN Coated

  Special flute shape and geometry suitable for machining stainless steel Excellent chip evacuation from better surface treatment Point R-thinning achieves superior centering and chip curling...

3/16" YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 5XD, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

3/16" YG-1 Carbide Dream Drill General, 6mm Shank, 140° Point, 5XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

3/16" Dia., 2 Flute., 3/16" LOC, 1/4" Plain Shank, 3/8" Length Below Shank, 3" OAL, Ball Nose Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Designed for high...