SALE Quick view YG-1 | sku: S06319 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view YG-1 | sku: S06221 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view YG-1 | sku: S06120 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view YG-1 | sku: S04815 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view YG-1 | sku: SV125300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV175580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV175460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV125106 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view YG-1 | sku: SV175240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: SV120300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: S06221 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view YG-1 | sku: S06120 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view YG-1 | sku: S04815 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view YG-1 | sku: SV125300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV175580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV175460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV125106 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view YG-1 | sku: SV175240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: SV120300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: S06120 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view YG-1 | sku: S04815 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view YG-1 | sku: SV125300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV175580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV175460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV125106 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view YG-1 | sku: SV175240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: SV120300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: S04815 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view YG-1 | sku: SV125300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV175580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV175460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV125106 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view YG-1 | sku: SV175240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: SV120300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: SV125300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV175580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV175460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV125106 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view YG-1 | sku: SV175240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: SV120300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: SV175580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV175460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV125106 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view YG-1 | sku: SV175240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: SV120300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: SV175460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV125106 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view YG-1 | sku: SV175240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: SV120300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: SV125106 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view YG-1 | sku: SV175240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: SV120300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: SV175240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: SV120300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: SV120300 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: SV170580 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: SV170460 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: SV170240 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: S09524 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view YG-1 | sku: S09324 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 1-23/32" Diameter x 1/4" Thick, Series 3, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $57.94 Was: $42.01 Now: $39.98 Add to Cart Compare SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 33mm Diameter x 4.8mm Thick, Series 2, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.63 Was: $33.08 Now: $31.48 Add to Cart Compare SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 59/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $38.76 Was: $28.10 Now: $26.74 Add to Cart Compare SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 4-1/2" Diameter x 7/16" Thick, Series 8, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $166.68 Was: $120.84 Now: $115.01 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 1-3/32" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $69.73 Was: $50.55 Now: $48.11 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 3" Diameter x 7/16" Thick, Series 5, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $172.84 Was: $125.31 Now: $119.26 Add to Cart Compare SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 58mm Diameter x 7.9mm Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $112.37 Was: $81.47 Now: $77.54 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $89.25 Was: $64.71 Now: $61.58 Add to Cart Compare SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK Join Our Mailing List Sign up for our newsletter to receive specials and up to date product news and releases. Subscribe
SALE Quick view 24mm Diameter x 4mm Thick, Series 1, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 :... MSRP: $59.22 Was: $42.93 Now: $40.86 Add to Cart Compare SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected × OK
SALE Quick view 3" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $103.77 Was: $75.23 Now: $71.60 Add to Cart Compare SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected
SALE Quick view 46mm Diameter x 6.4mm Thick, Series 3, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $69.47 Was: $50.37 Now: $47.93 Add to Cart Compare Previous 56 57 58 59 60 61 62 63 64 65 66 Next Previous 56 57 58 59 60 61 62 63 64 65 66 Next Compare Selected