1/4" Dia., 6 Flute., 1-1/2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2" Dia., 1-1/2" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter...

1/2" Dia., 1-1/2" LOC, 4 Flute, Long Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Solid Carbide Specs D1 Diameter...

3/8" Dia., 6 Flute., 1-1/2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4" Dia., 6 Flute., 1-1/2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4" Dia., 4 Flute., 1-1/2" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1" Dia., 4 Flute., 1-1/2" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4" Dia., 6 Flute., 1-1/2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1" Dia., 6 Flute., 1-1/2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4 Dia., 4 Flute., 1-1/2 LOC, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/4" Dia., 6 Flute., 1-1/2" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1 Dia., 4 Flute., 1-1/2 LOC, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

41/64" Dia., 4 Flute, Standard Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

41/64" Dia., 4 Flute, Standard Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and...

21/32" Dia., 4 Flute, Standard Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...