51/64" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated

Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle  - 132 degree

51/64" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert TiAlN Coated

Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle  - 132 degree

51/64" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert TiN Coated

Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle  - 132 degree

51/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

51/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiAlN Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

51/64" Diameter x 5/32" Thick, Series 1, Super Cobalt (T15) Spade Drill Insert TiN Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

51/64" Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

51/64" Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

51/64" Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

1/2" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

1/2" Dia., 3 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and...

7/32" Dia., 4 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

7/32" Dia., 4 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and...

13/64" Dia., 4 Flute, Stub Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

7/32" Dia., 2 Flute, Stub Length, Double End, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and...