3-19/32" Diameter x 7/16 in. Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

86mm Diameter x 11.1mm Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

2-21/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

55mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

1-7/64" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

22mm Diameter x 4mm Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

16.5mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

3-11/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

3-3/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)

7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree)