Quick view YG-1 | sku: S06013 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S04315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S04206 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view YG-1 | sku: S04114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S03316 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04512 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S04315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S04206 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view YG-1 | sku: S04114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S03316 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04512 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S04206 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view YG-1 | sku: S04114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S03316 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04512 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S04114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S03316 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04512 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S03316 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04512 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S03315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04512 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S03114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04512 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S04512 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S03522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S01315 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S01114 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S01605 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: S01225 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: P03404 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view YG-1 | sku: P01404 MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series MSRP: $340.73 Now: $248.73 Add to Cart Compare Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 16mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 1-1/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 1-21/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 2-3/4" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 42mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 21mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 3-1/8" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $84.82 Now: $61.92 Add to Cart Compare Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view 1-3/8" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $393.97 Now: $287.60 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected × OK
Quick view MT4 Shank, Straight Flute, Short Length Spade Drill Holder, 1-29/32" to 2-9/16" Insert Range, 4 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters MSRP: $340.73 Now: $248.73 Add to Cart Compare Previous 156 157 158 159 160 161 162 163 164 165 166 Next Previous 156 157 158 159 160 161 162 163 164 165 166 Next Compare Selected
