Quick view YG-1 | sku: SV125160 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV175430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV125102 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV120340 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV120308 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120244 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV120158 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV170430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV175430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV125102 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV120340 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV120308 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120244 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV120158 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV170430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV125102 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV120340 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV120308 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120244 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV120158 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV170430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV125056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV120340 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV120308 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120244 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV120158 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV170430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV125042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV120340 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV120308 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120244 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV120158 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV170430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV120340 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV120308 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120244 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV120158 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV170430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV120308 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120244 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV120158 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV170430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV120244 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV120158 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV170430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV120158 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV170430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV170430 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV120056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: SV120042 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: S09714 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: S09612 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view YG-1 | sku: S09504 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 1-15/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 1-1/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 3-5/8" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 3-1/8" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 2-11/16" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 1-29/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 43mm Diameter x 6.4mm Thick, 3 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $75.54 Now: $55.14 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 21/32" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 3-13/16" Diameter x 7/16" Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 3-9/32" Diameter x 7/16" Thick, Series 6, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $101.27 Now: $73.93 Add to Cart Compare Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected × OK
Quick view 2-9/16" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Previous 177 178 179 180 181 182 183 184 185 186 187 Next Previous 177 178 179 180 181 182 183 184 185 186 187 Next Compare Selected
