Quick view YG-1 | sku: SV520120 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV520048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view YG-1 | sku: SV520036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV570125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view YG-1 | sku: SV520026 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view YG-1 | sku: SV125420 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view YG-1 | sku: SV125360 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125328 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125262 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125230 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV520048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view YG-1 | sku: SV520036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV570125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view YG-1 | sku: SV520026 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view YG-1 | sku: SV125420 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view YG-1 | sku: SV125360 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125328 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125262 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125230 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV520036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV570125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view YG-1 | sku: SV520026 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view YG-1 | sku: SV125420 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view YG-1 | sku: SV125360 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125328 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125262 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125230 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV570125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view YG-1 | sku: SV520026 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view YG-1 | sku: SV125420 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view YG-1 | sku: SV125360 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125328 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125262 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125230 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV520026 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view YG-1 | sku: SV125420 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view YG-1 | sku: SV125360 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125328 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125262 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125230 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV125420 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view YG-1 | sku: SV125360 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125328 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125262 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125230 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV125360 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV125328 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125262 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125230 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV125328 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV125262 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125230 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV125262 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV125230 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV125230 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV125200 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV125116 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV125048 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV125036 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view YG-1 | sku: SV175125 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $41.69 Now: $30.43 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 1-5/16" Diameter x 3/16" Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.12 Now: $36.59 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 13/32" Diameter x 3/32" Thick, Y Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $45.97 Now: $33.56 Add to Cart Compare Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 4-5/16" Diameter x 7/16" Thick, 8 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $233.24 Now: $170.27 Add to Cart Compare Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 3-15/16" Diameter x 7/16" Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 3-7/16" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 2-31/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 2-15/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 2" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 1-1/4" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 3/4" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 9/16" Diameter x 1/8" Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected × OK
Quick view 12.5mm Diameter x 2.4mm Thick, Z Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $41.69 Now: $30.43 Add to Cart Compare Previous 77 78 79 80 81 82 83 84 85 86 87 Next Previous 77 78 79 80 81 82 83 84 85 86 87 Next Compare Selected
