1/2" Dia., 3 Flute., 2-1/2" LOC, 0.120" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 Diameter 5/8 D2 Shank Diameter 5/8 L1 ...

7/16" Dia., 3 Flute., 9/16" LOC, 0.120" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 Diameter 5/8 D2 Shank Diameter 5/8 L1 ...

5/8" Dia., 3 Flute., 1-5/8" LOC, 0.090" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 Diameter 5/8 D2 Shank Diameter 5/8 L1 ...

1/2" Dia., 3 Flute., 5/8" LOC, 0.060" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 Diameter 5/8 D2 Shank Diameter 5/8 L1 ...

5/8 Dia., 3 Flute., 3/4 LOC, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides Extra edge strength and unsurpassed tool life. Specs ...

5/8 Dia., 3 Flute., 3/4 LOC, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 Diameter 5/8 D2 Shank Diameter 5/8 L1 ...

IMCO IPT9 3/8", 9 Flute, .015R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 9 flutes for increased feed rates and excellent surface finish. The IPT9’s...

IMCO E14 9/64", 4 Flute, RR SPECTOR AlTiN Coated Carbide End Mill

For Speeds & Feeds - Click Here! For general machining in a wide range of materials Best for roughing and finishing AlTiN coated for superior heat resistance and hardness for increased tool life

1/8" Dia., 4 Flute., 5/32" LOC, 0.004" Corner Radius, 2" OAL, Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Deep slotting is possible by reduced neck.Corner radius for preventing the...

1/8 Dia., 3 Flute., 3/8 LOC, Ball Nose, ALU-Power HPC, Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC Catalog Download Specs D1 Diameter 3/8 in. D2 Shank...

3/8 Dia., 3 Flute., 1-1/2 LOC, Ball Nose, ALU-Power HPC, DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides extra edge strength and unsurpassed tool life. YG-1...

1/2 Dia., 4 Flute., 2-1/2 LOC, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/8" Dia., 2 Flute, 1-1/2" LOC, 0.125" Corner Radius AlTiN Coated Carbide End Mill

2 Flute, Corner Radius, Solid Carbide End Mill  Single End 30° Helix Corner Radius for Stronger Edges, Extend Tool Life Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 3/8" Length of...

3/8" Dia., 2 Flute, 1-1/2" LOC, 0.093" Corner Radius AlTiN Coated Carbide End Mill

2 Flute, Corner Radius, Solid Carbide End Mill  Single End 30° Helix Corner Radius for Stronger Edges, Extend Tool Life Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 3/8" Length of...

3/8" Dia., 2 Flute, 1-1/2" LOC, 0.062" Corner Radius AlTiN Coated Carbide End Mill

2 Flute, Corner Radius, Solid Carbide End Mill  Single End 30° Helix Corner Radius for Stronger Edges, Extend Tool Life Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 3/8" Length of...