IMCO E14 3/16", 4 Flute, RR SPECTOR AlTiN Coated Carbide End Mill

For Speeds & Feeds - Click Here! For general machining in a wide range of materials Best for roughing and finishing AlTiN coated for superior heat resistance and hardness for increased tool life

1/2" Dia., 4 Flute., 5/8" LOC, 0.012" Corner Radius, 3" OAL, Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Deep slott

3/8 Dia., 3 Flute., 1-1/2 LOC, Ball Nose, ALU-Power HPC, Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.

1/2 Dia., 3 Flute., 1-5/8 LOC, Ball Nose, ALU-Power HPC, DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.

9/16" Dia., 4 Flute, Standard Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics

9/16" Dia., 4 Flute, Standard Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics

33/64" Dia., 1-1/4" LOC, 2 Flute, Standard Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics

33/64" Dia., 1-1/4" LOC, 2 Flute, Standard Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics

1 Dia., 4 Flute., 1 LOC, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/4" Dia., 6 Flute., 1-1/8" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2" Dia., 4 Flute., 2-1/2" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/4" Dia., 4 Flute., 3/4" LOC, 0.030" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2 Dia., 4 Flute., 2-1/2 LOC, Chamfer, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4 Dia., 4 Flute., 1-7/8 LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

5/8" Dia., 3 Flute., 2-1/2" LOC, 0.190" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides Extra...