1" Dia., 2 Flute, 1-1/2" LOC, 0.030" Corner Radius Uncoated Carbide End Mill

2 Flute, Corner Radius, Solid Carbide End Mill  Single End 30° Helix Corner Radius for Stronger Edges, Extend Tool Life Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 1" Length of Cut ...

1" Dia., 2 Flute, 1-1/2" LOC, 0.020" Corner Radius Uncoated Carbide End Mill

2 Flute, Corner Radius, Solid Carbide End Mill  Single End 30° Helix Corner Radius for Stronger Edges, Extend Tool Life Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 1" Length of Cut ...

1" Dia., 2 Flute, 1-1/2" LOC, 0.010" Corner Radius Uncoated Carbide End Mill

2 Flute, Corner Radius, Solid Carbide End Mill  Single End 30° Helix Corner Radius for Stronger Edges, Extend Tool Life Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 1" Length of Cut ...

1" Dia., 2 Flute, 1-1/2" LOC, 0.032" Corner Radius Uncoated Carbide End Mill

2 Flute, Corner Radius, Solid Carbide End Mill  Single End 30° Helix Corner Radius for Stronger Edges, Extend Tool Life Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 1" Length of Cut ...

1" Dia., 2 Flute, 1-1/2" LOC, 0.062" Corner Radius Uncoated Carbide End Mill

2 Flute, Corner Radius, Solid Carbide End Mill  Single End 30° Helix Corner Radius for Stronger Edges, Extend Tool Life Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 1" Length of Cut ...

1" Dia., 2 Flute, 1-1/2" LOC, 0.015" Corner Radius Uncoated Carbide End Mill

2 Flute, Corner Radius, Solid Carbide End Mill  Single End 30° Helix Corner Radius for Stronger Edges, Extend Tool Life Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG  Diameter 1" Length of Cut ...

3/4" Dia., 6 Flute., 1-1/2" LOC, 0.015" Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/8" Dia., 6 Flute., 2" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/4" Dia., 4 Flute., 1-7/8" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

11/32" Dia., 4 Flute., 13/16" LOC, 0.030" Corner Rad V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

5/16 Dia., 4 Flute., 1-1/4 LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

13/16" Dia., 4 Flute, Standard Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and wear resistance Solid Carbide Specs D1 Diameter...

13/16" Dia., 4 Flute, Standard Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and wear resistance Solid Carbide Specs D1 Diameter...

3/4" Dia., 6 Flute., 2-1/4" LOC, 0.015" Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

1/2" Dia., 6 Flute., 5/8" LOC, 0.015" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...