IMCO IPT9 6 MM, 9 Flute, 0.5R 2XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 9 flutes for increased feed rates and excellent surface finish. The IPT9’s...

IMCO E14 8.0 MM, 4 Flute, RR SPECTOR AlTiN Coated Carbide End Mill

For Speeds & Feeds - Click Here! For general machining in a wide range of materials Best for roughing and finishing AlTiN coated for superior heat resistance and hardness for increased tool life

8MM Dia., 2 Flute., 12MM LOC, 8MM Plain Shank, 30MM Length Below Shank, 100MM OAL, Ball Nose Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Designed for high precision milling operation.Higher wear-resistance. ...

1/2" Dia., 4 Flute., 1" LOC, 0.030" Corner Rad, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/8" Dia., 6 Flute., 1" LOC, 0.090" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/4" Dia., 4 Flute., 2-1/4" LOC, 0.090" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/8" Dia., 6 Flute., 1-1/2" LOC, 0.090" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

3/4" Dia., 4 Flute., 3-1/4" LOC, 0.090" Corner Rad V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

IMCO IPT9 6 MM, 9 Flute, 1.0R 2XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 9 flutes for increased feed rates and excellent surface finish. The IPT9’s...

IMCO E14 10.0 MM, 4 Flute, RR SPECTOR AlTiN Coated Carbide End Mill

For Speeds & Feeds - Click Here! For general machining in a wide range of materials Best for roughing and finishing AlTiN coated for superior heat resistance and hardness for increased tool life

10MM Dia., 2 Flute., 15MM LOC, 10MM Plain Shank, 30MM Length Below Shank, 100MM OAL, Ball Nose Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Designed for high precision milling operation.Higher wear-resistance. ...

3/8" Dia., 6 Flute., 2" LOC, 0.090" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

1" Dia., 4 Flute., 1" LOC, 0.090" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter (harmonics) and improved stability Advanced coating for...

1/2 Dia., 2 Flute, 1 LOC, Uncoated Ball Nose Carbide End Mill

2 Flute, Regular Length, Uncoated Solid Carbide General Purpose Endmill Single End 30° Helix Ball Nose Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG Specs D1 Diameter 1/2 in. D2 Shank Diameter 1/2 in. L2 Length...

1/2 Dia., 4 Flute, 1 LOC, SKY Coated Ball Nose Carbide End Mill

4 Flute, Regular Length, SKY Coated Solid Carbide General Purpose Endmill Single End 30° Helix Center Cutting Solid Carbide End Mills CNC Ground in the USA by HTC Tool-Cutter MFG Specs D1 Diameter 1/2 in. D2 Shank Diameter 1/2 in. L2...