1MM Dia., 2 Flute., 1.5MM LOC, 0.10MM Corner Radius, 6MM Plain Shank, 40MM OAL, Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Deep slotting is

3/4" Dia., 4 Flute., 1-1/2" LOC, 0.060" Corner Rad, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1" Dia., 6 Flute., 4" LOC, 0.125" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4" Dia., 6 Flute., 1" LOC, 0.190" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

IMCO IPT11 12 MM, 11 Flute, 1.5R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 11 flutes for increased feed...

IMCO IPT13 12 MM, 13 Flute, 1.5R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 13 flutes yield incredible...

IMCO IPT9 12 MM, 9 Flute, 1.5R 2.5XD POW-R-PATH, AlCrNX Coated Carbide End Mill

For high-efficiency machining (HEM) in materials ranging from low carbon steels to hi-temp alloys. Engineered specifically for HEM tool paths. Great core strength and 9 flutes for increased feed...

IMCO E14 25.0 MM, 4 Flute, RR SPECTOR AlTiN Coated Carbide End Mill

For Speeds & Feeds - Click Here! For general machining in a wide range of materials Best for roughing and finishing AlTiN coated for superior heat resistance and hardness for increased tool life

1.5MM Dia., 2 Flute., 2.2MM LOC, 0.10MM Corner Radius, 6MM Plain Shank, 40MM OAL, Carbide End Mill

  Designed to machine high hardened materials.Suitable for dry cutting, high speed cutting due to newly developed raw-material and new coating.Excellent workpiece finish.Deep slotting is

1" Dia., 4 Flute., 1" LOC, 0.060" Corner Rad, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4" Dia., 6 Flute., 1-1/2" LOC, 0.190" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

11/16 Dia., 4 Flute, 1 1/2 LOC, SKY Coated Ball Nose Carbide End Mill

4 Flute, Regular Length, SKY Coated Solid Carbide General Purpose Endmill Single End 30°

11/16 Dia., 2 Flute, 1 1/2 LOC, SKY Coated Ball Nose Carbide End Mill

2 Flute, Regular Length, SKY Coated Solid Carbide General Purpose Endmill Single End 30°

11/16 Dia., 4 Flute, 1 1/2 LOC, SKY Coated Carbide End Mill

4 Flute, Regular Length, SKY Coated Solid Carbide General Purpose Endmill Single End 30°

11/16 Dia., 3 Flute, 1 1/2 LOC, SKY Coated Carbide End Mill

3 Flute, Regular Length, SKY Coated Solid Carbide General Purpose Endmill Single End 30°