Quick view YG-1 | sku: S06011 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S04313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S04204 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view YG-1 | sku: S04112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S03313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04507 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03519 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S04313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S04204 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view YG-1 | sku: S04112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S03313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04507 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03519 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S04204 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view YG-1 | sku: S04112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S03313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04507 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03519 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S04112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S03313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04507 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03519 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S03313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view YG-1 | sku: S03112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04507 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03519 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S03112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view YG-1 | sku: S04507 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03519 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S04507 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S03519 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S03519 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view YG-1 | sku: S01313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S01313 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view YG-1 | sku: S01112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S01112 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S01522 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S01434 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: S01222 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: GMH72911 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view YG-1 | sku: P03304 MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series MSRP: $342.48 Now: $250.01 Add to Cart Compare Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 15.5mm Diameter x 3.2mm Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) 2pcs/package MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 1-1/64" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $41.09 Now: $30.00 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $51.22 Now: $37.39 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 :... MSRP: $34.99 Now: $25.54 Add to Cart Compare Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 2-5/8" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 2-29/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiAlN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $85.16 Now: $62.17 Add to Cart Compare Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 41mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $42.56 Now: $31.07 Add to Cart Compare Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 20.5mm Diameter x 5/32" Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $29.14 Now: $21.27 Add to Cart Compare Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 2-31/32" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $73.34 Now: $53.54 Add to Cart Compare Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 2-15/32" Diameter x 5/16" Thick, Series 4, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $50.52 Now: $36.88 Add to Cart Compare Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 1-5/16" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert TiN Coated General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle - 132 degree, (Series 5-8 : 144... MSRP: $34.28 Now: $25.02 Add to Cart Compare Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view 1/2 Dia., 6 Flute., 2 LOC, 0.030 Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40 Excellent material removal rates and surface finishes Unequal indexing for reduced chatter... MSRP: $144.29 Now: $101.00 Add to Cart Compare Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected × OK
Quick view MT4 Shank, Straight Flute, Standard Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series 2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters... MSRP: $342.48 Now: $250.01 Add to Cart Compare Previous 270 271 272 273 274 275 276 277 278 279 280 Next Previous 270 271 272 273 274 275 276 277 278 279 280 Next Compare Selected
