MT3 Shank, Straight Flute, Short Length Spade Drill Holder, 31/32" to 1-3/8" Insert Range, 2 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters...

1-1/4" Shank, Straight Flute, Extended Length Spade Drill Holder, 1-13/32" to 1-7/8" Insert Range, 3 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters...

1" Shank, Straight Flute, Standard Length Spade Drill Holder, 31/32" to 1-3/8" Insert Range, 2 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters...

1" Shank, Straight Flute, Short Length Spade Drill Holder, 31/32" to 1-3/8" Insert Range, 2 Series

2-FLUTE EXCHANGEABLE DRILLS WITH INTERNAL COOLANT Various Grades of Cutting Tool Materials Available, Diverse Applications High Productivity and Longer Tool Life For Drilling Larger Diameters...

3/16" Dia., 4 Flute., 5/8" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4" Dia., 3 Flute., 1" LOC, 5" Reach, 7" OAL, 0.030" Corner Rad, ALU-Power Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

3/4" Dia., 3 Flute., 1" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 1-5/8" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 1-1/4" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

3/4" Dia., 3 Flute., 1" LOC, 0.060" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 1-5/8" LOC, 0.030" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2" Dia., 3 Flute., 2" LOC, 0.010" Corner Rad, ALU-Power HPC Chipbreaker Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.Chip Breaker Improves chip evacuation by shortening the chip length.Ability to counteract extreme...

1/2 Dia., 4 Flute., 5/8 LOC, 0.015 Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/16" Dia., 4 Flute., 5/8" LOC, 0.010" Corner Rad V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

5/8" Dia., 3 Flute., 3/4" LOC, 1-5/8" Reach, 4" OAL, 0.190" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...